Philips 3000i Series - The Wi-Fi setup is not successful

21EN
Problem Possible solution
The Wi-Fi setup is
not successful�
• If the router your purier is connected to is dual –
band and currently it is not connecting to a 2�4GHz
network, please switch to another band of the same
router (2�4GHz) and try to pair your purier again� 5GHz
networks are not supported�
• Web authentication networks are not supported�
• Check if the purier is within range of the Wi-Fi router�
You can try to locate the air purier closer to the Wi-Fi
router�
• Check if the network name is correct� The network
name is case-sensitive�
• Check if the Wi-Fi password is correct� The password is
case-sensitive�
• Retry the setup with the instructions in section "Set up
the Wi-Fi connection when the network has changed"�
• The Wi-Fi connectivity can be interrupted by
electromagnetic or other interferences� Keep the
appliance away from other electronic devices that may
cause interferences�
• Check if the mobile device is in airplane mode� Make
sure to have the airplane mode deactivated when
connecting to the Wi-Fi network�
• Consult the help section in the App for extensive and
up-to-date troubleshooting tips�