MHL, Mobile High-Definition Link and the MHL Logo
are trademarks or registered trademarks of the MHL,
LLC.
11.9
Software
Update Software
Software Version
To view the current TV software version…
1 - Press , select Settings and press OK.
2 - Select Update Software > Current
Firmware and press OK.
3 - The version, release notes and creation date are
shown.
4 - Press (left) repeatedly if necessary, to close
the menu.
Update from website
You can find the current firmware version of your TV
in the settings menu under “Update Software” >
"Current firmware".
Regularly check www.philips.com/support for new
Firmware updates.
Follow the instructions below to update the firmware
of your TV.
Download the latest software...
1 - Launch the Internet Explorer.
2 - Enter the Philips support site at url
http://www.philips.com/support .
3 - Enter the model number. (You can find your
model number from the label on the rear of the TV. )
4 - When enter your TV’s product page, select
Support.
5 - Select “Software updates”, and click on
“Download file” to download the software. (The
software is available as a zip file.)
6 - If the software version is higher than the version
installed on your TV, click the software download
link.
7 - Accept the license agreement/Terms and
Conditions, select “I agree”, then the zip file will be
downloaded automatically.
8 - Unzip the zip file to any directory using an archive
utility.
9 - Create a folder name “upgrades” in the main
directory of your USB flash drive.
10 - Copy the upg file you have extract earlier into
the upgrades folder, as depicted in the picture
below.
11 - Disconnect your USB flash drive from the
computer.
Update the software...
1 - Connect your USB flash drive (containing the
software update) to the USB connector on the TV.
Wait 30 seconds or until the USB drive is recognized
by the TV.
2 - Your TV will start loading the software
automatically.
3 - When the loading of the software finished, press
“Start” to activate the upgrade of the TV.
39
To Next Page
Loading...
