EN
4646
Select connected equipment
Before operating your connected equipment you have to make
a selection in the Installation, Select your connections menu,
p. 29.
1. Press the
MENU/BROWSE key.
2. Select TV menu and press the cursor right.
3. Select Installation.
4. Press the cursor right.
5. Select Connections.
6. Press the cursor right.
7. Select the input to which the peripheral equipment is
connected.
8. Press the cursor right again to enter the list of types of
peripherals connected to the selected input
9. Select the peripheral equipment with the cursor up/down.
Record a TV programme
You can record a TV programme using your recorders tuner
without affecting your TV.
1. Select the channel number on your recorder.
2. Set your recorder to record.
See the handbook for your recorder.
Note: switching channel numbers on your TV does not
disturb recording !
Record with your recorder
To Next Page
Loading...
