T
Taylor BurtonSep 13, 2025
Why didn't my Philips LCD TV save my picture settings?
- MMackenzie NguyenSep 13, 2025
If your Philips LCD TV did not save your picture settings, check that the TV location is set to the home setting.
To Next PageTo Next PageWhy didn't my Philips LCD TV save my picture settings?
If your Philips LCD TV did not save your picture settings, check that the TV location is set to the home setting.
Why Philips 32PFL56*5H/12 remote is not working after switching on?
If your Philips TV does not respond to the remote control or side controls immediately after being switched on, this is normal. The TV requires some time to start up, and during this time, it will not respond to inputs.
How to fix Philips LCD TV that does not switch on?
If your Philips LCD TV doesn't switch on, try these steps: First, disconnect the power cable from the power socket, wait one minute, and then reconnect it. Also, check that the power cable is securely connected and that the power switch on the bottom or back of the TV is switched on.
What to do if my Philips LCD TV is on, but there is no picture?
If your Philips LCD TV is on but showing no picture, ensure the antenna is properly connected. Also, check that you have selected the correct device as the TV source.
How to improve Philips 32PFL56*5H/12 antenna reception?
If you're experiencing poor TV reception on your Philips TV from an antenna connection: * Ensure the antenna is properly connected to the TV. * Be aware that loudspeakers, unearthed audio devices, neon lights, high buildings, and other large objects can affect reception quality. Try changing the antenna direction or moving devices away from the TV to improve reception. * If only one channel has poor reception, fine-tune that specific channel.
What to do if my Philips LCD TV does not respond to the remote control?
If your Philips LCD TV does not respond to the remote control or side controls when switched on, it may be because the TV requires some time to start up. During this time, the TV will not respond, which is normal.
Why can't I use EasyLink features on my Philips 32PFL56*5H/12?
If you cannot use EasyLink features on your Philips TV, check that your HDMI devices are HDMI-CEC compatible.
How to improve poor TV reception on my Philips LCD TV?
To improve poor TV reception on your Philips LCD TV, first, check that the antenna is properly connected. Loudspeakers, unearthed audio devices, neon lights, high buildings, and other large objects can affect reception quality. Try changing the antenna direction or moving devices away from the TV. If reception is poor on only one channel, fine-tune that specific channel.
How to stabilize computer display on Philips 32PFL56*5H/12?
If the computer display on your Philips TV is not stable, check that your PC uses the supported resolution and refresh rate. Also, set the TV picture format to unscaled.
How to fix poor picture quality from connected devices on my Philips LCD TV?
If you're experiencing poor picture quality from connected devices on your Philips LCD TV, first, ensure that the devices are connected properly. Also, check that the picture settings are correctly configured.
General