19
3
4
directory of the USB device.
Update software (analogue
broadcasts)
Before you perform this procedure, make sure
you have:
Enough time to complete the entire
update.
A USB storage device with at least 64MB
of storage space.
Access to a computer with a USB port
and internet access.
1 Switch on the TV set.
2 Connect the USB storage device to the
TV.
3 Press to select [Setup] >
[Software update] > [Local update].
4 Press OK.
5 Follow the on-screen instructions to
complete the software update.
Change TV preferences
The [Preferences] menu allows you to
customise various features and functions.
1 Press (Home).
2 Select [Setup] > [Installation] >
[Preferences].
[Location] : Optimises TV settings
for your location - home or shop.
[Volume bar] : Displays the volume
bar when you adjust the volume.
[EasyLink] : Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
[Pixel Plus Link] : Overrides the
settings of connected devices and
uses the settings of the TV.
[E-sticker] : For shop mode only.
Sets the location of the e-sticker.
2 Press (Home).
» The home menu appears.
3 Press to select [Browse USB].
4 Press to navigate to the picture of
your choice.
5 Press SCENEA.
» Your picture is stored as the default
Scenea picture in your TV.
6 Disconnect the USB storage device.
Adjust wallpaper settings
1 Press (Home).
2 Select [Setup] > [Features] > [Scenea].
3 Press to select from the following
settings:
[Activate] : Enters the Scenea mode.
[ECO] : Applies low-energy settings.
Select [On] to display wallpaper with
lower brightness.
Note
Select the [ECO] setting before you select
[Activate] to display Scenea wallpaper.
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1 Press (Home).
2 Select [Setup] > [Software update] >
[Current software].
Download the software
1 On your PC, open a web browser and go
to www.philips.com/support.
2 Download the latest software upgrade
English
EN
To Next Page
Loading...
