7
{ ACTIVE CONTROL
The TV continuously measures and corrects incoming signals to
provide the best picture quality.
c TV
Switches back to the antenna source from EasyLink mode.
d Color buttons
Selects tasks or options.
e SOURCE
Selects connected devices.
f OPTIONS
Activates the quick access menu (see ‘Use the quick access menu’
on page 13 ) .
g OK
Activates a selection or accesses the menu.
h
( Navigation buttons )
Navigates through the menus.
i INFO
Displays information about the TV channel or accessory device.
The quality and accuracy of the information depends on the
broadcaster. You might see a difference in broadcast time if the
broadcast is from a different time zone.
j
( Fast Forward )
Searches forward on your EasyLink device.
k
( Record )
Starts or stops video recording on your EasyLink device.
l MUTE
Mutes or restores audio output.
m CH +/-
Switches to the next or previous channel.
n FORMAT
Selects a picture format .
o Number buttons
Select a channel, page or setting.
p . (Dot)
Press the dot (.) for digital channels.
q PREV CH
Returns to the previously viewed channel.
r VOL +/-
Increases or decreases volume.
s
Stops playback on your EasyLink device.
t
Searches backward on your EasyLink device.
u
Starts, pauses or resumes playback on your EasyLink device.
v MENU/EXIT
Turns the menu on or off.
w BACK
Returns to a previous screen.
x AUTO MODE
Cycles through the preset picture and sound settings (see ‘Use
Auto Mode’ on page 15 ) .
y DEMO
Toggles the demo menu on or off .
z SLEEP
Sets a delay after which the TV switches to standby.
English
EN
To Next Page
Loading...
