Philips 32PFL7605H - Picture and Sound Settings; Smart Picture Adjustments

EN 13
English
Switch channels
• Press on the remote control or
P/CH +/- on the side of the TV.
• Press , then select [Channel list] to
use the channel list.
• Press to return to the previously-
viewed channel.
• Enter a channel number using the
Numeric buttons.
To view analogue or digital channels only
Filter the channel list to access analogue or
digital channels only.
1. In the channel list, press .
2. Select [Select list] > [Analogue channels]
or [Digital channels], then press OK.
Depending on your selection, only digital or
analogue channels become available.
Adjust volume
NonPubli sh
To increase or decrease volume
• Press +/- on the remote control.
• Press +/- on the side of the TV.
NonPubli sh
To mute or unmute sound
• Press
to mute the sound.
• Press again to restore the sound.
Use the [Sound] menu to adjust headphone
volume. For more information, see Setup
the TV > Change picture and sound
settings > More sound settings (Page 26).
Use Smart picture settings
NonPubli sh
Use the [Smart picture] experience bar to
access frequently-used picture settings.
1. While watching TV, press
.
2. Select [Smart picture], then select one of
the following settings:
• [Personal]: Sets the TV to your
personal preferences set in the
[Picture] menus in [Setup].
• [Vivid]: Rich and dynamic settings, ideal
for daylight use.
• [Natural]: A natural picture setting.
• [Cinema]: Ideal settings for watching
movies.
• [Game]: Ideal settings for gaming.
• [Energy saving]: The most energy-
conscious settings. Factory standard
settings.
• [Standard]: Adjusts picture settings to
suit most environments and types of
video.
• [Photo]: Ideal settings for viewing
photos.