Philips 32PFL7605H - Channel Management; Watch TV Basics

EN 12
Channel list
NonPubli sh
The channel list displays the TV channels and
possible radio stations installed on your TV.
1. While watching TV, press .
2. Select [Channel list], then press OK.
3. Select a channel, then press OK to access
the channel.
4. Press
to exit the channel list without
changing the channel.
Add your devices
NonPubli sh
When you have connected a device to the
TV, always add this device as an item in the
home menu. With this item in the home
menu, you can easily switch the TV to this
device.
In the home menu, select [Add your
devices], then press OK. Follow the
instructions on-screen to add the device to
the home menu.
To remove a device from the home menu,
select the item, press
and select [Remove
this device]. Press OK.
Setup
NonPubli sh
[Setup] in the home menu allows you to
change most of the TV settings, including:
• Picture or sound settings
• Installation or update of TV channels
• Update of TV software
• Other special features
Options
NonPubli sh
Option menus offer convenient settings
related to what is on-screen.
1. Press to see what options are available.
2. To exit, press
again.
Watch TV
Switch on/off or to standby
To switch on
Press the power switch (1) on the bottom
of the TV.
To switch on from standby
Press
on the remote control (2).
To switch to standby
Press on the remote control.
To switch off
Press the power switch on the bottom of
the TV.
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an
extended period of time, switch off the TV
using the power switch on the bottom of
the set.
Tip: If you cannot locate your remote
control and want to switch on the TV from
standby, press P/CH +/- on the side of the
TV.