Philips 32PFL7605H - 4 Set Up Your TV; Picture Settings Adjustment

EN 25
English
4 Set up the TV
Change picture and sound
settings
Settings assistant
NonPubli sh
Use the settings assistant to guide you
through the picture and sound settings.
1. While watching TV, press
.
2. Select [Setup] > [Personalise picture and
sound], then press OK.
3. Select [Start], then press OK.
Follow the on-screen instructions to choose
your preferred settings.
Smart picture settings
Use the [Smart picture] experience bar to
access frequently-used picture settings.
1. While watching TV, press
.
2. Select [Smart picture], then select one of
the following settings:
• [Personal]: Sets the TV to your
personal preferences set in the
[Picture] menus in [Setup].
• [Vivid]: Rich and dynamic settings, ideal
for daylight use.
• [Natural]: A natural picture setting.
• [Cinema]: Ideal settings for watching
movies.
• [Game]: Ideal settings for gaming.
• [Energy saving]: The most energy-
conscious settings. Factory standard
settings.
• [Standard]: Adjusts picture settings to
suit most environments and types of
video.
• [Photo]: Ideal settings for viewing
photos.
• [Custom]: Allows you to customise and
store personal picture settings.
3. Press OK to confirm your choice.
4. Press
to exit.
More picture settings
NonPubli sh
1. Press .
2. Select [Setup] > [Advanced TV settings]
> [Picture], then press OK.
3. Select a setting to adjust:
• [Smart picture]: Accesses pre-defined
smart picture settings.
• [Reset]: Resets to factory default
settings.
• [Contrast]: Adjusts the intensity of
bright areas, keeping dark areas
unchanged.
• [Brightness]: Adjusts the intensity and
details of dark areas.
• [Colour]: Adjusts colour saturation.
• [Hue]: Compensates colour variations
in NTSC encoded transmissions.
• [Sharpness]: Adjusts sharpness in the
image.
• [Noise reduction]: Filters and reduces
noise in an image.
• [Tint]: Adjusts the colour balance in an
image.
• [Custom tint]: Customises tint setting.
• [Pixel Plus HD]: Accesses advanced
settings, including [100 Hz Clear LCD],
[Dynamic contrast], [Dynamic
backlight], [MPEG artefact reduction],
[Colour enhancement], [HD Natural
Motion], [Gamma].
• [PC mode]: Enables picture settings
adjustment when a PC is connected to
the TV via HDMI. If enabled, you can
select [Picture format] > [Unscaled]
which provides maximum detail for
display of PC content.
• [Light sensor]: Adjusts settings
dynamically to match lighting conditions.
• [Picture format]: Changes the picture
format.
• [Screen edges]: Changes the picture
size.
• [Picture shift]: Adjusts the position of
the picture.