Home Theatre System
First, use an HDMI cable to connect the device to the TV.
Finally, use a digital audio cinch cable to connect the device to the TV or, alternatively, use the
analogue Audio Out L/R.
Audio Out L/R
If there is no digital audio output on the
home theatre, you can use the TV's
analogue Audio Out L/R connection.
Audio and Video synchronisation (sync)
If the sound does not match the video on
screen, you can set a delay on most home
theatres to match the sound and video.
Do not connect the audio signal from a
DVD player or other device directly to the
home theatre. Always lead the sound
through the TV first.
To Next Page
Loading...
