To Next PageTo Next Page
Need help?Do you have a question about the Philips 32PW9618 and is the answer not in the manual?
General| Screen Size | 32 inches |
|---|---|
| Display Type | CRT |
| Resolution | 100 Hz |
| Aspect Ratio | 16:9 |
| Number of Speakers | 2 |
| HD Support | No |
| Pixel Plus | Yes |
| Real Flat picture tube | Yes |
| Connectivity | S-Video |
Details vision, sound, and miscellaneous specifications.
Describes front, top, and side I/O connections.
Essential safety regulations for repair and post-repair checks.
Recommendations for maintenance inspection intervals and procedures.
Critical warnings regarding high voltage, ESD, and component handling.
Step-by-step instructions for disassembling the TV set.
Describes specific service positions for modules like DAF and SSB.
Procedures for removing assemblies and Printed Wiring Boards (PWBs).
Instructions for reassembling the TV set in reverse order.
Identifies test points and measurement conditions.
Explains Service Default Mode (SDM) and Service Alignment Mode (SAM).
Troubleshooting tips related to picture and sound issues.
Information about ComPair, a service tool for diagnostics and repair.
Lists and explains error codes detected by the system.
Procedure to view error buffer contents via the front LED.
Details various protection mechanisms in the chassis.
General repair advice and tips for specific phenomena.
Instructions on how to upgrade the TV software using ComPair.
Provides a detailed wiring diagram of the TV.
Shows the functional blocks of the supply and deflection circuits.
Visual overview of test points on LSP, Auto SCAVEM, and CRT panels.
Illustrates the video signal path and processing blocks.
Visual overview of test points on the Small Signal Board.
Shows the audio signal path, processing, and output blocks.
Diagrams illustrating the control signals and interactions between modules.
Overview of ICs communicating via the I2C bus and their interconnections.
Diagrams showing the distribution of various supply voltages throughout the circuit.
Functional block diagram of the wireless transmitter and receiver system.
Circuit diagram and PWB layout for the main power supply.
Circuit diagram and PWB layout for the standby power supply.
Circuit diagram and PWB layout for the line deflection circuitry.
Circuit diagram and PWB layout for the frame deflection and E/W drive circuits.
Circuit diagram and PWB layout for the rotation circuitry.
Circuit diagram and PWB layout for the audio amplifier stages.
Circuit diagram and PWB layout for the small signal processing parts.
Circuit diagram and PWB layout for the front control panel.
Pin assignment and layout for the connector on the Small Signal Board.
Circuit diagram for the IF and video processing sections of the Small Signal Board.
Circuit diagram for the PICNIC (Feature Box) module.
Circuit diagram for the Falconic module, including motion estimation.
Circuit diagram for the Eagle module, handling pixel plus and other features.
Conditions and settings required for performing electrical adjustments.
Procedures for hardware-based alignments like Vg2 and Focus.
Procedure for aligning the focus of the CRT picture.
Software-based alignments for geometry, white tone, and tuner IF settings.
Detailed description of the TV's power supply circuits.
