56 E-mail
phonebook again and add new names to the mail-
ing list.
5.
Repeat steps 2 to 4 to add as many recipients as
wanted.
6.
Select
Validate list
and press
,
. Then enter the
subject of your e-mail (you can leave this field
empty) and press
,
.
7.
In the next window, enter the text of your e-mail
(you can also leave this field empty). Press
,
when ready to send your e-mail.
To learn how to enter text, see “Text or number entry”
page 4. If you exit the
Send e-mail
menu before sending
your e-mail, its content is deleted without being stored.
8.
Select
Modify mail
and press
,
if you want to
change the content of your e-mail. This takes you
back to step 2: follow the instructions from there
to complete the list of recipients and send your
e-mail.
9.
Select
Send now
and press
,
to send your
e-mail. Your mobile phone connects to the Inter-
net server, sends your e-mail to the names present
in your mailing list, then disconnects.
You can cancel this operation by pressing and holding
the
e
key. Your mobile will then disconnect from the
network, exit the e-mail menu and go back to idle. Dis-
connection also occurs each time you enter the
Settings
menu while a connection is in progress. In this case,
your e-mail is lost.
Depending on the call settings you configured (see
“Call waiting” page 33), you can receive calls during an
e-mail connection. In this case, and if you accept the
incoming call, your phone switches to the call screen
context and the e-mail menu is closed; the phone goes
back to idle when you hang up.
With an attachment
1.
Repeat steps 1 to 7 described above. Select
Attach
file
and press
,
.
2.
A list appears, showing the available JPEG files.
Select the image you wish to send and press
,
.
You can only attach one JPEG file at a time. If you exit
the
Send e-mail
menu before sending your e-mail, its
content (including attachment) is deleted without be-
ing stored.
3.
Select
Modify mail
or
Send now
and press
,
to
confirm.
Philips330_EMEA_Ind3.book Page 56 Jeudi, 31. juillet 2003 3:48 15
To Next Page
Loading...
