Philips 37HFL4482F/F7 - Page 21

Service Modes, Error Codes, and Fault Finding
EN 21TPB1.2HU LA 5.
2011-Mar-11
Figure 5-5 Example of SAM - 1 -
With the Left/Right cursor keys to select Quality-> Whitepoint
alignment, the set will enter the other factory mode display.
How to Navigate
With the up/down cursor keys can be used to navigate through
the menu, while with the Left/Right cursor the values can be
changed.
How to EXIT
Choose “EXIT”, and press the right cursor button, then press
the back button.
Figure 5-6 Example of SAM - 2 -
Table 5-1 Contents of SAM 1
18890_204_100920.eps
100920
1
8890_205_100920.eps
100920
Action Items Range Default Value Description
22" 26" 32" 37" 42"
Brand PHILIPS PHILIPS PHILIPS PHILIPS PHILIPS
Brand customer
Date 20100729 20100825 20100729 20100729 20100729
Released software date
Model name 22HFL5662H/F
7
26HFL5662H/F
7
32HFL5662H/F
7
32HFL5682D/F
7
42HFL5682H/F
7
Project model name. with the Left/Right cursor the project model name
can be changed
Speaker ID 21111
Speaker ID selected
Serial number BZ1A1033001
420
BZ1A1033001
421
BZ1A1033001
422
BZ1A1033001
423
BZ1A1033001
424
Project serial number. With the up/down cursor keys can be used to
navigate through the menu, while with the Left/Right cursor the values
can be changed at the 1, 2 and 4 characters, use the numeric keys at the
remote control for the other numeric values directly.
Scaler type RTD2472FD RTD2472FD RTD2472FD RTD2482FD RTD2482FD
Scaler IC type
Software Ver LGD22_RTD24
72FDV1.00
LGD26_RTD24
72FDV1.01
LGD32_RTD24
72FDV1.00
LGD37_RTD24
82FDV1.00
LGD42_RTD24
82FDV1.00
Software version
EEProm Ver BEDa-
ta.1.00.201007
29
BEDa-
ta.1.00.201008
25
BEDa-
ta.1.00.201007
29
BEDa-
ta.1.00.201007
29
BEDa-
ta.1.00.201007
29
EEPROM software version
Panel type 932227708682 932227709682 932228014682 932227710682 932227711682
Panel indentification by means of 12NC
Panel resolution 1366 × 768 1366 × 768 1366 × 768 1920 × 1080 1920 × 1080
Panel resolution in pixels
Panel size 22 26 32 37 42
Panel diagonal size in Inch
Panel aspect ratio 16 : 9 16 : 9 16 : 9 16 : 9 16 : 9
Panel aspect ratio
Brightness 50 50 50 50 50
Brightness adjustment
Contrast 50 50 50 50 50
Contrast adjustment
Sharpness 25 25 25 25 25
Sharpness adjustment
Color 5050505050
Colour adjustment
Hue 5050505050
Hue adjustment
Color temp cool cool cool cool cool Colour temperature setting (NORMAL, COOL, WARM)
Scaler gain 0 - 255 R 121 G 122
B128
R 119 G 115
B128
R 123 G 126
B128
R 122 G 124
B128
R 121 G 121
B128
Back-end scaler RGB gain NVM hasYPbPr NORMAL, WARM, COOL,
CUSTOMER four settings. Other sources use offset with hardcoding
Scaler offset 0 - 255 R 128 G 128 B
128
R 128 G 128 B
128
R 128 G 128 B
128
R 128 G 128 B
128
R 128 G 128 B
128
Back-end scaler RGB offset NVM hasYPbPr NORMAL, WARM, COOL,
CUSTOMER four settings. Other source use offset with hardcoding
Burn in
Off Off Off Off Off
Reset the set to standard manufacturer's settings
EEPROM init
OK OK OK OK OK
Reset the EEPROM to initial mode
Burn in time
00000 hours 00000 hours 00000 hours 00000 hours 00000 hours
Total burn-in time
Total time
29558 hours 53309 hours 30521 hours 26798 hours 44729 hours
Total running time
Reset
OK OK OK OK OK
Reset the set to initial mode
HDMI Res
1366 × 768 1366 × 768 1366 × 768 1920 × 1080 1920 × 1080
Select the resolution
HDMI Freq AUTO AUTO AUTO AUTO AUTO Select the HDMI frequency
Volume 43 43 43 43 43 Select the volume value
Exit Press
right
cursor
Exit from factory mode