Service Modes, Error Codes, and Fault Finding
EN 22 TPB1.2HU LA5.
2011-Mar-11
Table 5-2 Contents of SAM 2
5.2 Software Upgrading
5.2.1 Introduction
Philips continuously tries to improve its products, and it’s
recommend that the TV software is updated when updates are
available. Software update files can be obtained from the
dealer or can be downloaded from the following websites:
http://www.philips.com/support
Preparing a portable memory for software upgrade
The following requirements have to be met:
1. A personal computer connected to the Internet.
2. An archive utility that supports the ZIP-format (e.g. WinZip
for Windows or Stufflt for Mac OS).
3. A USB flash drive (preferably empty).
Note:
1. Only FAT/DOS-formatted flash drives are supported.
2. Only use software update files that can be found on the
http://www.philips.com/support
web site.
5.2.2 Check the current TV software version
Before starting the software upgrade procedure, it is advised to
check that what the current TV software:
1. Press the “1 2 3 6 5 4” button on the remote control to enter
the CSM mode.
2. Use the left/right cursor keys to select “Software Versions”.
If the current software version of the TV is the same as the
latest update file found on http://www.philips.com/support
, it is
not necessary to update the TV software.
5.2.3 Download the latest software
1. Point the web browser to http://www.philips.com/support
.
2. Find information and software related to the TV.
3. Select the latest software update file and download it to the
PC.
4. Insert a USB flash drive into one of the USB ports of the
PC.
5. Decompress the downloaded ZIP file and copy the
software of back-end board, Smart module board and
Stand by to the root directory of the USB flash drive. E.g.
TVSoftwareUpgrade_BEvx.xx.upg for back-end board
software, TVSoftwareUpgrade_SMvx.xx.x.upg for smart
module board software,
TVSoftwareUpgrade_MCUvx.x.upg for smart module
board standy-by software.
5.2.4 Update the TV software
1. Insert mains power and wait for system to boot completely.
2. Insert the USB flash drive that contains the software
update files.
3. The TV will detect the USB flash drive automatically. Press
the “back” button on the remote control to exit it.
See Figure 5-7
.
4. Press “3 1 9 7 5 3 Mute” on the guest remote control or
Menu on setup remote control (Green/Yellow RC) , and
enter the “Setup Menu”. See Figure 5-8
.
5. Please select [TV Upgrade] > [Source] > [USB], and press
OK. See Figure 5-8
.
6. Please select [Direction] > [USB To TV], and press OK.
See Figure 5-8
.
7. Please select [Upgrade Type] > [Software Upgrade
Package], and press OK. See Figure 5-8
.
Action Items Range
Default Value
Description
32" 37" 42"
Brand PHILIPS PHILIPS PHILIPS
Brand customer
Date 20101217 20101217 20101217
Released software date
Model name 32HFL4462F/F7 32HFL4482F/F7 42HFL4482F/F7
Project model name. with the Left/Right cursor the project model
name can be changed
Speaker ID 1 1 1
Speaker ID selected
Serial number BZ1A1033001422 BZ1A1033001423 BZ1A1033001424
Project serial number. With the up/down cursor keys can be used to
navigate through the menu, while with the Left/Right cursor the
values can be changed at the 1, 2 and 4 characters, use the numeric
keys at the remote control for the other numeric values directly.
Scaler type RTD2472FD RTD2482FD RTD2482FD
Scaler IC type
Software Ver LGD32_RTD2472FDV1.02 LGD37_RTD2482FDV1.02 LGD42_RTD2482FDV1.02
Software version
EEProm Ver BEData.1.00.20100825 BEData.1.00.20100825 BEData.1.00.20100825
EEPROM software version
Panel type 932228014682 932227710682 932227711682
Panel indentification by means of 12NC
Panel resolution 1366 × 768 1920 × 1080 1920 × 1080
Panel resolution in pixels
Panel size 32 37 42
Panel diagonal size in Inch
Panel aspect ratio 16 : 9 16 : 9 16 : 9
Panel aspect ratio
Brightness 50 50 50
Brightness adjustment
Contrast 50 50 50
Contrast adjustment
Sharpness 25 25 25
Sharpness adjustment
Color 50 50 50
Colour adjustment
Hue 50 50 50
Hue adjustment
Color temp cool cool cool Colour temperature setting (NORMAL, COOL, WARM)
Scaler gain 0 - 255 R 123 G 126 B128 R 122 G 124 B128 R 121 G 121 B128 Back-end scaler RGB gain NVM hasYPbPr NORMAL, WARM,
COOL, CUSTOMER four settings. Other sources use offset with
hardcoding
Scaler offset 0 - 255 R 128 G 128 B 128 R 128 G 128 B 128 R 128 G 128 B 128 Back-end scaler RGB offset NVM hasYPbPr NORMAL, WARM,
COOL, CUSTOMER four settings. Other source use offset with
hardcoding
Burn in
Off Off Off
Reset the set to standard manufacturer's settings
EEPROM init
OK OK OK
Reset the EEPROM to initial mode
Burn in time
00000 hours 00000 hours 00000 hours
Total burn-in time
Total time
32137 hours 43390 hours 12220 hours
Total running time
Reset
OK OK OK
Reset the set to initial mode
HDMI Res
1366 × 768 1920 × 1080 1920 × 1080
Select the resolution
HDMI Freq AUTO AUTO AUTO Select the HDMI frequency
Volume 43 43 43 Select the volume value
Exit Press right
cursor
Exit from factory mode
To Next Page
Loading...
