Philips 4000 series - Connections and Setup; Connecting Antenna, Cable, or Satellite Box




5


Connectionsandsetup
RefertoyourTV’sQuickStartGuideorotherprovideddocumentationtoformodel‐specificinformation
aboutattachingthebaseorawallmountandmakingconnectionstoACpowerandtoyourother
audio/videodevices.ThefollowinginformationappliestoallRokuTVmodels.
Connecting an antenna, cable, or satellite box
Ifyouareusinganantenna,CATVcablewithoutaset‐topbox,oracableorsatelliteboxthathasonlyan
antennaoutput,connecta75‐ohmcoaxialcable(notprovided)fromthedevicetotheANT/CABLEinput
ontheTV.
Tip:Ifyouareusinganantennawith
a300ohmtwin‐leadcable,youneedtousea300‐to‐75ohm
adapter(notprovided)toadaptthetwin‐leadcabletoaconnectionthatiscompatiblewiththeTV’s
antennainput.
Tip:IfyoureceiveyourTVstationsthroughasettopboxfromacable
orsatelliteTVprovider,connectit
totheTVusingthebestconnectionmethodavailable.Frommosttoleastdesirable:
 HDMI
®
input–DigitalHDandSDvideo
 AVinput–analogSD video
 Antennainput–analogSDvideousingNTSC