Philips 4000i Series Quick Start Guide

Mars TFT_AC3854/AC3858 CEE_EN
90x127mm
When display shows
When display shows
Time to clean the NanoProtect lter Series 3
Time to replace the NanoProtect
lter Series 3
Press to check lter lifetime status.
!
Press for 3 seconds to reset after cleaning or replacing lter.
3000 038 71833-1
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
Connectivity
Auto mode
Display
Control
Turbo mode Sleep mode
PM2.5
indicator
Air quality
light
Indoor allergen
index
Gas
indicator
Good Poor Very poorFair
Allergen index
1-12, 1 indicates
best air quality
Gas index
from L1-L4,
L1 indicates
best air quality
Filter cleaning
alert
Filter replacement
alert
Wi-Fi
indicator
Power Light
on/o
Display
switch
Mode
switch
Auto
Turbo
Sleep
PM2.5
Gas
IAI
Filter status/
reset
Maintenance
2
1
PM2.5
IAI Gas
2
PM2.5
IAI
Gas
NanoProtect lter Series 3 (FY4440/30)
2
Clean Home+
Open the app and click on "Connect a New Device" or press
the "+" button to connect your device. Please follow the
steps in the app.
You can use the app to control the purier and check air
quality. Download and install the Philips app
PM2.5
IAI Gas
2
PM2.5
IAI Gas
2

Philips 4000i Series Specifications

General

Filter Type	HEPA, Active Carbon
Allergens Filtration	Yes
Virus Filtration	Yes
Smart Control	Yes
Auto Mode	Yes
Sleep Mode	Yes
Child Lock	Yes
Connectivity	Wi-Fi
Air Quality Sensor(s)	PM2.5, Gas
Particle Filtration	99.97% (PM2.5)