What does it mean when the standby light on my Philips TV is red and blinking?
If the standby light on your Philips TV is red and blinking, disconnect the power cable from the power outlet. Wait for the TV to cool down before reconnecting the power cable. If the light continues to blink, please contact Philips Customer Care Centre.
Why are my HDMI devices not working with my Philips TV?
If you are experiencing problems with HDMI devices connected to your Philips TV, HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from a HDMI device. If the TV does not recognise the HDMI device and no picture is displayed, try switching the signal source to another device before switching it back again. If there are intermittent sound disruptions, check that the output settings from the HDMI device are correct. If you are using a HDMI to DVI adapter or cable, check if the audio cable that comes with the product is connected to AUDIO (only for mini jacks).
Why doesn't my Philips TV save picture settings?
If your Philips TV did not save your picture settings, check that the TV location is set to the home setting. This mode offers you the flexibility to change and save settings.
Why is sound coming from one speaker only on my Philips TV?
If the pictures are showing but sound comes from one speaker only on your Philips TV, verify that the sound balance is set to the centre.
General| Screen Size | 40 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Type | LCD |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Backlight Type | LED |
| Smart TV | No |
| Built-in Wi-Fi | No |
| Digital TV Standard | DVB-T |
To Next Page
