English
10
Control panel
a VOLUME +/−
Press to adjust volume down (−) / up (+) or to move
left (−) / right (+) when selecting menu items.
b MENU
Press to display the main menu.
c CHANNEL +/−
Press to select channels or to move up ( +) / down ( −) when
selecting menu items.
d POWER
Press
POWER to Turn the unit On and go into Standby mode.
To completely Turn Off the unit, you must unplug the AC power
cord.
e Infrared sensor
Receives IR signals from remote control.
f Power On indicator
Lights up white when the unit is turned On and fl ashes while the
unit is turning On.
g Ambient light sensor
Alters the brightness of the TV screen automatically by detecting
your room lighting level. Do not block the light sensor allowing it
to work properly.
a
b
c
d
gef
Terminals
h Digital Audio Output jack
Digital Audio (S/PDIF) Output to home theaters and other Digital
Audio systems.
i Component (Y/Pb/Pr) / Composite Video (VIDEO) Input jacks for
VIDEO
Composite Video Input (VIDEO) jack is shared jack with
Component Video Input (Y) jack.
j Analog Audio (L/R) Input jacks
Connect Analog Audio signals from;
- HDMI-DVI / Analog Audio (L/R) jacks signal
- Component Video / Analog Audio (L/R) jacks signal
- Composite Video / Analog Audio (L/R) jacks signal
- PC Connection / Analog Audio (L/R) jacks signal with Stereo
mini 3.5mm plug Audio cable on PC
k HDMI Input jack(s)
Digital audio and video Input from high defi nition Digital devices
such as Blu-ray disc players, cable boxes and satellite set-top
boxes.
l PC Input jack
VGA cable connection for PC.
m USB terminal
Data Input from USB Memory Stick only.
Do not connect any device to this terminal such as; Digital
camera, keyboard, mouse, etc.
n 75 ohm Cable / Antenna connection
Signal Input from an antenna, cable or satellite.
o Headphone Audio Output jack
Headphone 3.5mm stereo jack for personal listening.
h
j
k
l
m
n
o
i
To Next Page
Loading...
