English
19
Picture
Before you begin:
You must set Home in Location.
➠
p. 27
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
1 Press MENU / EXIT and use ▲▼ to select Picture then press OK.
Picture
Sound
Setup
Features
Language
USB
Settings assistant
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
Personal
18
50
30
30
0
2
2 Use ▲▼◄► to select the item you want to adjust, then press
OK.
Settings assistant
to guide you through the best picture setting
Auto picture
to select the desired setting, then press OK
(Personal, Standard, Vivid, Sports, Movie, Game and Eco)
When you adjust the following settings, Personal will
be set automatically.
Cursor ◄ Cursor ►
Backlight
to reduce power
consumption
to set the backlight
brighter
Contrast
to decrease contrast to increase contrast
Brightness
to decrease brightness to increase brightness
Color
to decrease color
intensity
to increase color intensity
Tint
to add red to add green
Sharpness
to soften to sharpen
* Advanced settings
to select the desired setting, then press OK
(Color alignment, Noise reduction, Active Control,
Black stretch, Dynamic contrast and Gamma)
Note
• Adjusts backlight for the best picture quality by dynamically adjusting the backlight
intensity in accordance with lighting condition in the room when Active Control is set
to Ambient On. Please ensure the room lighting is stable and the light sensor is not
blocked.
*You can set a particular about picture quality in Advanced settings.
Picture
Sound
Setup
Features
Language
USB
Color alignment
Noise reduction
Active Control
Black stretch
Dynamic contrast
Gamma
Normal
On
Off
On
On
Gamma 2
Color
alignment
Color
temperature
mode
to set the color temperature to Personal,
Cool, Normal and Warm
When you adjust the following settings,
Personal will be set automatically.
Cursor ◄ Cursor ►
Red gain
to decrease contrast
with red
to increase contrast
with red
Green gain
to decrease contrast
with green
to increase contrast
with green
Blue gain
to decrease contrast
with blue
to increase contrast
with blue
Red offset
to decrease
brightness with red
to increase brightness
with red
Green offset
to decrease
brightness with green
to increase brightness
with green
Blue offset
to decrease
brightness with blue
to increase brightness
with blue
Noise
reduction
Off
to set noise reduction to Off
On
to reduce noise in an image
Active
Control
Off
to set Active Control to Off
Ambient On
to adjust backlight for the best picture quality by
dynamically adjusting the backlight intensity in
accordance with lighting condition in the room
Ambient Off
to adjust backlight for best picture quality
based on the incoming video signal
Black
stretch
Off
to set black stretch to Off
On
to enhance black color
Dynamic
contrast
Off
to set dynamic contrast to Off
On
to enhance contrast in an image automatically
Gamma
Gamma 1
to change the gamma setting
Gamma 2
Gamma 3
To Next Page
Loading...
