Why is the picture quality of streaming movie poor on Philips 40PFL5706?
If the picture quality of a streaming movie is poor on your Philips Flat Panel TV, check the speed of your internet connection. You need speeds of at least 8 Mbps for high-quality uninterrupted playback.
What to do if my Philips Flat Panel TV has no picture or sound?
If your Philips Flat Panel TV has no picture or sound, ensure that your HDMI cable is certified. You can also try pressing the SOURCE button on the remote to switch to another source and then back to the HDMI source. Resetting both the accessory device and the TV might also help. Ensure the TV and the accessory device are turned on and the HDMI channel is selected. As an alternative, while both devices are powered on, unplug and reinsert the HDMI cable.
What to do if my Philips 40PFL5706 Flat Panel TV has no picture or sound after channel installation?
If your Philips Flat Panel TV has no picture or sound, and receives channels via an AV connection, set the TV to the correct source input. If the TV is connected directly to the wall via a coaxial connection, perform the autoprogram again.
How to troubleshoot Philips 40PFL5706 Flat Panel TV cannot connect to network?
To troubleshoot why your Philips Flat Panel TV cannot connect to the network, check if the Ethernet cable connection is properly made. Ensure that the modem or broadband router is turned on. Verify the network settings on your TV. Also, confirm that the broadband router and/or modem is correctly connected.
Why Philips 40PFL5706 remote control not working?
If your Philips Flat Panel TV is not responding to the remote control, make sure you are using the correct TV remote control. Check that the batteries are inserted correctly and are not low on power; replace them if needed.
Why Philips 40PFL5706 cannot use VUDU feature?
If you cannot use the VUDU feature on your Philips Flat Panel TV, check if the network connection is properly made.
Why is the audio of internet radio station interrupted on Philips Flat Panel TV?
If the audio of an internet radio station is interrupted on your Philips Flat Panel TV, it could be because the vTuner server, the station itself, or your internet connection is busy. Alternatively, the bit rate of the station might be too high.
Why Philips 40PFL5706 Flat Panel TV cannot use Netflix feature?
If you cannot use the Netflix feature on your Philips Flat Panel TV, first, check if the network connection is properly made. Also, visit www.netflix.com/Philips on your PC and become a Netflix member.
Why can't I control my Philips 40PFL5706 and connected devices with one remote?
If you cannot control your Philips Flat Panel TV and connected devices with one remote control, confirm that the connected devices are EasyLink compliant and connected to your TV via an HDMI cable. Be aware that not all brands of devices, such as Blu-ray Disc players, use the same system as Philips EasyLink.
How to get sound from PC to Philips 40PFL5706 Flat Panel TV using PC input?
If no sound is detected from your PC using the PC input jack on your Philips Flat Panel TV, connect an audio cable to the PC / HDMI 4 AUDIO IN on the TV. Also, press SOURCE on the remote control and select the PC source.
Instructions for cleaning the TV screen and frame to avoid damage.
Notification from manufacturer in case of recall or safety defect.
Guarantees privileges like money-saving offers upon registration.
Identification of buttons and functions on the remote control.
Guide to powering on the TV and performing the initial setup process.
Methods for changing TV channels using the remote or TV controls.
How to increase, decrease, or mute the TV volume.
Adjusting visual and audio parameters for optimal viewing.
Configuring network connections for internet services.
Instructions and precautions for safely mounting the TV on a wall.
Guide to choosing the TV's interface language.
Process to automatically scan and tune TV channels.
Method to manually add channels not found by autoprogram.
How to find the TV's current software version.
Procedures for updating TV software via USB or network.
Diagram showing all available TV input/output ports.
Guidance on choosing the best connection type (HDMI, Component, Composite).
Examples of connecting various external devices to the TV.
Instructions to get a digital version of the user manual.
Information on how to get customer support for unresolved issues.
Details on features that improve image quality.
Details on features that improve audio quality.
List of available input/output ports and supported signal types.
Details of what the product warranty includes.
Information on warranty exclusions and limitations.
General| Equalizer | Yes |
|---|---|
| Audio system | Dolby Digital |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| Response time | 6 ms |
| Display diagonal | 40 \ |
| Display brightness | 450 cd/m² |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Native refresh rate | 120 Hz |
| Supported video modes | 1080i, 1080p, 480i, 480p, 720p |
| Viewable size diagonal | 1020 mm |
| Contrast ratio (typical) | 5000:1 |
| Screen format adjustments | 4:3, 14:9, 16:9 |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1440 x 900 (WXGA+), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA) |
| Operating temperature (T-T) | 5 - 35 °C |
| HDMI ports quantity | 4 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio coaxial out | 1 |
| Sustainability certificates | ENERGY STAR |
| Product color | Black |
| Panel mounting interface | 400 x 200 mm |
| Product weight | 32.63 lbs |
| Set depth (inch) | 4.33 \ |
| Set width (inch) | 38.90 \ |
| Set height (inch) | 24.17 \ |
| Box depth (imperial) | 6.93 \ |
| Box width (imperial) | 46.46 \ |
| Box height (imperial) | 27.95 \ |
| Package weight (imperial) | 45.19 lbs |
| Set depth (with stand) (inch) | 9.06 \ |
| Set height (with stand) (inch) | 25.63 \ |
| Weight (with stand) (imperial) | 37.48 lbs |
| Audio formats supported | MP3 |
| Image formats supported | JPG |
| Video formats supported | AVI, H.264, MPEG1, MPEG2, MPEG4, WMV |
| Tuner type | Analog & digital |
| Supported TV bands | UHF, VHF |
| Analog signal format system | NTSC |
| Digital signal format system | ATSC |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 145 W |
To Next Page