EasyManua.ls Logo

Philips 40PUG6300 - Universal Access - Key Beep

Philips 40PUG6300
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Clear sound
With Clear sound, you improve the sound for speech.
Ideal for news programs. You can turn the speech
improvement on or off.
To turn on or off . . .
1 - Press
and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Clear
sound.
3 - Press
(right) and select On or Off.
4 - Press
, repeatedly if necessary, to close the
menu.
HDMI ARC
If you do not need an Audio Return Channel (ARC) on
any of the HDMI connections, you can turn the ARC
signal off.
For more information, press
Keywords and look
up HDMI ARC.
Audio Out format
With Audio Out format you can set the audio out
signal of the TV to fit the sound processing
capabilities of your Home Theater System.
For more information, press
Keywords and look
up Audio Out format.
Audio Out levelling
With Audio Out leveling you can level the sound
volume of the Home Theater System with the volume
of the TV when you switch over from one to another.
For more information, press
Keywords and look
up Audio Out leveling.
Audio Out delay
If you set an Audio sync delay on your Home Theater
System, to synchronize the sound with the picture,
you must turn off Audio Out delay on the TV.
For more information, press
Keywords and look
up Audio Out delay.
Audio Out offset
If you cannot set a delay on the Home Theater
System, you can set a delay on the TV with Audio Out
offset.
For more information, press
Keywords and look
up Audio Out offset.
TV placement
As part of the first installation, this setting is set to
either On a TV stand or Wall mounted.If you have
changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
1 - Press
and select Setup and press OK.
2 - Select TV settings > General settings > TV
placement and press OK.
3 - Select On a TV stand or Wall mounted and press
OK.
4 - Press
, repeatedly if necessary, to close the
menu.
20.4
Universal access - Key beep
Key beep gives an audio feedback each time you
press a key on the remote control. The volume of the
beep is fixed.
To turn on Key beep . . .
1 - While you watch TV, press
OPTIONS .
2 - Select Universal access - Key
beep > On, then press OK.
For more information, press
Keywords and look
up Universal access - Key beep.
56

Table of Contents

Related product manuals