10
Connecting to Optional
Equipment
● A digital component with a built-in MPEG 2 or
Dolby Digital™ decoder allows you to enjoy the
surround sound while producing the effect of
being in a movie theater or a concert hall.
● The player outputs the surround sound signals
from the DIGITAL OUT COAXIAL connectors.
If your receiver has a MPEG 2 or Dolby
Digital™ decoder,
1 Connect the COAXIAL DIGITAL AUDIO OUT of the
DVD player to the COAXIAL DIGITAL AUDIO IN on
your receiver.
Notes:
– If the audio format of the digital output does
not match the capabilities of your receiver, The
receiver will produce a distorted sound or no
sound at all.
– To see the selected audio format of the
current DVD in the Setup Menu, refer to “Setup
Menu”.
Preparation
TO VIDEO IN TO SCART IN
OR
REAR
SPEAKERS
REAR
SPEAKERS
TO COAXIAL IN
RECEIVER with
MPEG 2 or Dolby
Digital™ decoder
MDV423_02_Eng 2004.4.6, 1:47 PM10
To Next Page
Loading...
