45
English
EN
Use one-touch play
1 After enabling EasyLink, press play on
your device.
» The TV automatically switches to the
correct source.
Use one-touch standby
1 Press and hold (Standby) on the TV’s
or device’s remote control for at least
three seconds.
» The TV and all connected HDMI
devices switch to standby.
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
To Next Page
Loading...
