Philips 42HFL5682D/F7 - USB Media Playback; USB File Access; Guest Menu Settings; Guest Menu: Language, Sleeptimer, Source

Mechanical Instructions
EN 16 TPB1.2HU LA4.
2011-Mar-11
Figure 4-13 Rear cover removal [3/3]
4.3.2 Smart Module Board
Refer to Figure 4-14
to Figure 4-15 for details.
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the smart module board.
1. Remove fixation screws [1] that secure the smart module
board connector with the back-end board.
2. Remove fixation screws [2] that secure the smart module
board.
Caution: When fixation screws [2] are removed first, the
smart module board connector can be damaged.
3. Pull out the smart module board horizontally until it is fully
disconnected from the back-end board.
Caution: Do not lift up the smart module board before it is
completely disconnected from the back-end board. Both
boards could be damaged. Do not damage the EMC foam
at the bottom side of the smart module board metal shield.
When defective, replace the whole unit.
Figure 4-14 Smart module board removal [1/2]
18890_103_100915.eps
101015
4
4
1
M5 × 11
4
4 × 30
3
M3 × 8
M3 × 6
2
1
1
2
5
4
4
4
4
3
4
4
4
3
4
4
4
2
2
5
5
5
M4 × 8
1 1
18890_104_100916.eps
101015
3
1
2
2
2
2
2
1
Pull out