11
Switch channels
Press CH+ or CH- on the remote
control.
Press CH +/- on the TV.
For xxPFL5xx6 and xxPFL4xx6
For xxPFL3xx6
Switch your TV to standby
Press (Standby-On) on the remote
control again.
» The remote control sensor on the TV
switches to red.
Switch your TV off
Press the power switch on the TV again.
» The remote control sensor on the TV
switches off.
» For xxPFL5xx6, the TV no longer
consumes energy.
» For xxPFL4XX6 and xxPFL3xx6,
though the TV consumes very little
power when in standby, energy
continues to be consumed. When not
in use for an extended period of time,
disconnect the TV power cable from
the power outlet or turn off the power
switch.
Note
If you cannot locate your remote control and
want to switch on the TV from standby, press
CH+/- on the TV.
English
EN
To Next Page
Loading...
