30
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1 While you watch TV, press .
2 Select [Setup] > [Watch demo], OK.
3 Select a demo and press OK to view it.
4 To exit, press .
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1 Press .
2 Select [Setup] > [TV settings] >
[Factory settings], then press OK.
3 If you are prompted to enter a code,
enter the child-lock code (see ‘Set or
change code’ on page 23).
»
4 Press OK
Change TV preferences
Use the preferences menu to customise your
TV settings.
1 Press .
2 Select [Setup] > [TV settings] >
[Preferences].
3 Select one of the following, then press
OK.
[Menu language]: Select a menu
language.
[Sleep timer]: Switch the TV to
[Location]: Optimise TV settings for
your location - home or shop.
[E-sticker]: (For shop mode only)
Switch the e-sticker on or off.
[Volume bar]: Display the volume
bar when you adjust the volume.
[Auto switch off]: To conserve
energy, set the TV to switch off
automatically after a period of
inactivity.
[Channel information size]: Change
the type of information that is
displayed when you switch channels.
[Universal access]: Enable or disable
the universal access menu.
[Key beep]: Enable audio feedback
when you press buttons on the
remote control or TV.
[Audio out delay]: Automatically
sync the image on your TV to the
audio from a connected Home
Theatre.
[TV position]: Apply the best
settings for your TV based on how it
is mounted.
[Teletext 2.5]: Enable or disable
Teletext 2.5. (For digital TV)
[Clock]: Display or remove the time
from the TV, and set clock options.
EN
To Next Page
Loading...
