41
Switch other devices to standby
If you connect an EasyLink- compliant device
that has speakers, you can get the most out
of those speakers if you listen to TV audio
through them.
If the connected device is HDMI-ARC
compliant, and you connect the device
through an HDMI ARC connector, you can
output TV audio through the HDMI cable.
You do not need an additional audio cable.
1 Press the green button.
2 Select [Switch off unused sources], then
press OK.
» All connected EasyLink devices are
switched to standby.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
switch on Pixel Plus Link.
1 Press .
2 Select [Setup] > [TV settings] >
[EasyLink] > [Pixel Plus Link] > [On],
then press OK.
Hear TV audio through another
device
If you connect an EasyLink- compliant device
that has speakers, you can get the most out
of those speakers if you listen to TV audio
through them.
If the connected device is HDMI-ARC
compliant, and you connect the device
through an HDMI ARC connector, you can
output TV audio through the HDMI cable.
You will not need an additional audio cable.
1 Make sure that the EasyLink-compliant
device is connected through an HDMI
ARC connector (see ‘Back connections’
on page 34).
2 Press .
3 Select [Setup] > [TV settings] >
[EasyLink] > [HDMI1 - audio out], then
press OK.
4 Select one of the following, then press
OK.
[On]: Hear the TV audio through
the connected EasyLink device. You
cannot hear the TV audio through
the TV speakers or through devices
connected through the digital audio
out connector.
[Off]: Hear the TV audio through
the TV speakers, or through a device
connected through the digital audio
out connector.
5 Control playback with the TV remote
control play buttons.
English
EN
To Next Page
Loading...
