4-2 A9PH1DC
7. Remove the Module IR.
Insert a minus screwdriver in the hole of A, and
release a locking tab.
8. Remove the Left Loudspeaker.
Remove the 4 screws.
9. Remove the Right Loudspeaker.
Remove the 4 screws.
10. Remove the TFT-LCD.
Remove the 10 screws.
2. Set Re-assembly
To re-assemble the whole set, execute all processes in
reverse order.
Note: While re-assembling, make sure that all cables
are placed and connected in their original
position.
• The content is different according to the product.
A
To Next Page
Loading...
