12
2. Setting up the Display
Resolution notification
This Display is designed for optimal
performance at its native resolution,
3840 x 2160 @ 60 Hz. When the Display
is powered on at a different resolution,
an alert is displayed on screen: Use
3840 x 2160 @ 60 Hz for best results.
Display of the native resolution alert
can be switched off from Setup in the
OSD (On Screen Display) menu.
Physical Function
Tilt
10
°
-5°
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
Display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the Display face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
2. Loosen the assembly screws, then
detach the bases from the Display.
Note
This Display accepts a 200mm x
200mm VESA-Compliant mounting
interface.
200mm
200mm
6
To Next Page
Loading...
