English
31
Night Mode
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
A In ‘Audio’, press to select { Night
Mode }, then press .
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
B Use to select a setting and press
OK to con rm.
Down Sampling
You can enable and disable the digital
signal for better sound output quality.
A In ‘Audio’, press to select { Down
Sampling }, then press .
{ On }
Playback a disc recorded at the sampling
rate of 48kHz.
{ Off }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
B Use to select a setting and press
OK to con rm.
DVD Menu Options (continued)
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
Using the Rating setup menu
A Press SETUP on the remote control.
The system setup menu appears.
Language
Video
Audio
Misc
Rating
Language
Video
Audio
Misc
Rating
Aspect Ratio : 4:3
Language
Video
Audio
Misc
Rating
Parental control : 8.Aduit
Set Password
B Press to select { Rating }, then
press .
C Press to select an item, then press
to access.
Example: { Parental Control }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use to select a setting and press
OK to con rm.
Example: { 8 Adult }
The setting is selected and setup is
complete.
E To exit, press SETUP.
01-39_xDV437_438_55_77_eng2.indd31 3101-39_xDV437_438_55_77_eng2.indd31 31 2007-01-03 11:20:56 AM2007-01-03 11:20:56 AM
To Next Page
Loading...
