47
English
5 Place new shaving heads in the holder.
6 Place the retaining rings back onto the
shaving heads and turn them clockwise to
reattach the retaining ring.
- Each retaining ring has two recesses
that t exactly into the projections
of the shaving head holder. Turn the
ring clockwise until your hear a click to
indicate that the ring is xed.
Note: Hold the shaving head holder in
your hand when you reinsert the shaving
heads and reattach the retaining rings. Do
not place the shaving head holder on a
surface, as this may cause damage to the
shaving heads.
7
Insert the hinge of the shaving head
holder into the slot in the top of the
shaving unit and close the shaving unit.
1
2
To Next Page
Loading...
