Philips 50PUT7303/56 - Page 27

button with the home icon.
CTN_ALT BOM# Panel Type Panel ID
50PUT7303/56
TPT500U1-QVN03.U S7B0M 63
50PUT7303/79
TPT500U1-QVN03.U S7B0M 63
50PUT7303/98
TPT500U1-QVN03.U S7B0M 63
55PUT7303/56
TPT550U1-QVN05.U S57B0F 32
55PUT7303/79
TPT550U1-QVN05.U S57B0F 32
55PUT7303/98
TPT550U1-QVN05.U S57B0F 32
65PUT7303/56
TPT650UA-QVN06.U S300AL 33
65PUT7303/79
TPT650UA-QVN06.U S300AL 33
65PUT7303/98
TPT650UA-QVN06.U S300AL 33
Result:
After accepting the Set Option Code the TV set stores the following items in NVM:
- the TV Set type (Model Number),
- the related option codes, and the default White Point values.
Then the TV set switches to Stand-by to indicate the process is completed.
Note:
Entering a non existing Set Option Code has no effect.
4. Use remote control to switch “ON” the TV set.
5. Use SAM mode to check the Set type (Model number) in NVM and to manually correct if it is wrong.
6. Optionally, check other TV-related items present in NVM and manually adapt them via SAM:
- TV Production code (Serial number on stickers),
- 18 AC of replacement SSB (see bar code sticker on SSB),
- 18 AC of actual Power Supply Unit (see bar code sticker on PSU board),
- 18 AC of actual Display Panel.
Result:
After leaving the SAM mode, the TV set should switch to Standby. The NVM should contain the correct option codes, TV related items and default White
Point values.