6-1 PL11.3_INT
HOW TO INITIALIZE THE LCD TV
The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to
select a language and program channels after the set has been initialized.
To put the program back at the factory-default, initialize the LCD TV using the following procedure.
1. Turn the power on.
2. Enter the service mode.
- To cancel the service mode, press [ ] button on
the remote control unit.
3. Press red button on the remote control unit to
initialize the LCD television.
4. After confirming that “INITIALIZED FINISH”
appears on the screen, unplug the AC Cord.
To Next Page
Loading...
