To Next PageTo Next Page
Need help?Do you have a question about the Philips 55PFL6008H/12 and is the answer not in the manual?
Details on product information, getting started, manuals, FAQs, and software.
Information on how to use the product.
Details about the various input and output connections for the device.
Overview of the chassis and its components.
Safety regulations to follow during repair, including isolation transformer and component replacement.
Important warnings and precautions to be aware of before and during operation or repair.
Guidelines for placing the TV set for easy servicing and measurements.
Instructions and precautions for removing the assembly or panel.
Steps for reassembling the set after repair, in reverse order of disassembly.
Discusses measurement conditions and the use of test patterns for diagnosing faults.
Explains Service Default Mode (SDM), Service Alignment Mode (SAM), and Customer Service Mode (CSM).
Describes the start-up diagrams and conditions.
Details on error codes, how they are logged, and their interpretation.
Information on software protections and fault conditions that trigger them.
Tips and methods for troubleshooting and repairing faults.
Instructions on how to upgrade the software for the TV set.
Discusses software-related protections, supply error detection, and safety mechanisms.
Describes CSM activation and its function for dumping information to a USB stick.
Details on the power supply, voltage regulators, and over-current protection circuits.
Recommendations for checking LED drivers if no picture or backlight is present when CSM is activated.
Importance of checking display option codes after SSB replacement to avoid side-effects.
Instructions and attention points for replacing the SSB, including data upload and software upgrade.
Describes the normal conditions for automatic software upgrades via USB.
Manual activation of the backup software upgrade application when the default method fails.
Steps for upgrading the standby software via a USB stick.
Conditions to perform electrical adjustments, including power supply and test probe requirements.
Steps for setting correct options and storing aligned values in SAM.
Procedure for adjusting white point settings using a color analyzer or LCD screens.
Procedures for resetting the NVM on a repaired SSB, setting service type and production code.
Details about the power supply unit, including ordering new boards.
Reference to figure 7-2 for the power architecture.
Information about the power supply unit, replacement procedures, and fuse specifications.
Overall block diagram of the TV system, showing component interconnections.
Diagram illustrating the power supply lines and voltage distribution within the chassis.
Circuit diagram illustrating the Fusion power supply and its voltage regulators.
Circuit diagram of the Fusion supply, illustrating DC-DC converters.
Circuit diagram for the Class-D audio amplifier.
General