Audio Out Format
For more information, in Help, press the colour
key
Keywords and look up Audio Out Format.
Audio Out Levelling
For more information, in Help, press the colour
key
Keywords and look up Audio Out Levelling.
Audio Out Delay
If you set an Audio sync delay on your Home Theatre
System, to synchronise the sound with the picture,
you must switch off Audio Out Delay on the TV.
To switch off Audio Out Delay…
1 - Press
, select All Settings and press OK.
2 - Select Sound and press
(right) to enter the
menu.
3 - Select Advanced > Audio Out Delay and
press OK.
4 - Select Off.
5 - Press
(left) repeatedly if necessary, to close
the menu.
For more information, in Help, press the colour
key
Keywords and look up Audio Out Delay.
Audio Out Offset
If you cannot set a delay on the Home Theatre
System, you can set a delay on the TV with Audio
Out Offset.
To synchronise the sound on the TV…
1 - Press
, select All Settings and press OK.
2 - Select Sound and press
(right) to enter the
menu.
3 - Select Advanced > Audio Out Offset and
press OK.
4 - Use the slider bar to set the sound offset and
press OK.
5 - Press
(left) repeatedly if necessary, to close
the menu.
For more information, in Help, press the colour
key
Keywords and look up Audio Out Offset.
Headphone volume
With Headphones Volume, you can set the volume
of a connected headphone separately.
To adjust the volume…
1 - Press
, select All Settings and press OK.
2 - Select Sound and press
(right) to enter the
menu.
3 - Select Headphones Volume and press OK.
4 - Press the arrows
(up) or
(down) to adjust
the value.
5 - Press
(left) repeatedly if necessary, to close
the menu.
Speakers
TV Speakers
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
You can select where you want to hear the TV sound
and how you want to control it.
• If you select TV Speakers Off, you permanently
switch off the TV speakers.
• If you select TV Speakers On, the TV speakers are
always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound
to the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
• If you select EasyLink Autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink Autostart selected, you can
still switch to TV speakers if necessary.
To set the TV speakers…
1 - Press
, select All Settings and press OK.
2 - Select Sound and press
(right) to enter the
menu.
3 - Select Advanced and press
(right) to enter
the menu.
4 - Select TV Speakers and press
(right) to
enter the menu.
5 - Select TV Speakers On, TV Speakers
Off, EasyLink, or EasyLink Autostart .
6 - Press
(left) repeatedly if necessary, to close
the menu.
To switch to speakers directly…
1 - While watching TV, press
.
2 - Select Speakers and select TV or Audio
System.
3 - Press
(left) repeatedly if necessary, to close
the menu.
Wireless Speakers
What You Need
You can connect a wireless speaker (a subwoofer or a
sound bar) to this TV.
A range of selected Philips wireless speaker products
62
To Next Page
Loading...
Need help?
General