3.2.2 Stand removal
1. For 6162 series, remove the fixation screws [1] that secure the stand.
For 6262 series, remove the fixation screws [1] that secure the stand.
2. Take the stand bracket out from the set.
( 6162 series)
(6262 series)
3.2.3 Rear Cover
Warning: Disconnect the mains power cord before removing the rear cover.
1. For 6162 series, remove the fixation screws [2], [3] and [4] that secure the back cover.
For 6262 series, remove fixation screws [3] and [4] that secure the back cover
2. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.