Philips 55PUS6262/12 User Manual

3.2.6 Power Supply Unit (PSU)
Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU.
1. Gently unplug all connectors from the PSU.
2. Remove all fixation screws from the PSU.
3. The PSU can be taken out of the set now.
3.2.7 Speakers
1. Gently release the tapes that secure the speaker cables.
2. Unplug the speaker connector from the SSB.
3. Take the speakers out.
When defective, replace the both units.
3.2.8 WIFI module
1. Unplug the connector from the SSB.
2. Remove fixation screw that secure the WIFI module.
When defective, replace the whole unit.

Philips 55PUS6262/12 Specifications

General

Screen Size	55 inches
Display Technology	LED
Smart TV	Yes
HDR	Yes
Ambilight	Yes
HDMI Ports	3
USB Ports	2
Screen Shape	Flat
Aspect Ratio	16:9
Internet TV	Yes
Operating System	SAPHI
Refresh Rate	60 Hz
Wi-Fi	Yes
Bluetooth	No
Sound Output	20 W
Component Video (YPbPr/YCbCr) In	1
Digital Audio Optical Out	1
Headphone Outputs	1
Common Interface (CI)	Yes
Common Interface Plus (CI+)	Yes
VESA Mounting	Yes
VESA Mounting Interfaces	200 x 200 mm
Product Colour	Silver
Resolution	3840 x 2160 pixels
Motion Interpolation Technology	PMR (Perfect Motion Rate)
HDR Formats	HDR10
HDMI Version	HDMI 2.0a