Philips 55PUS6804/12

1. Product information
Product specifications are subject to change without notice.
For more specification details of this product, see
www.philips.com/TVsupport
Display Resolution
Diagonal screen size
 43PUS6xx4: 108cm/43inch
 50PUS6xx4: 126cm/50inch
 55PUS6xx4: 139cm/55inch
 58PUS6xx4: 147cm/58inch
 65PUS6xx4: 164cm/65inch
 70PUS6xx4: 176cm/70inch
 75PUS6xx4: 189cm/65inch
Display resolution
 3840 x 2160
Support Timing
Video support timing also includes field/frame rate
23.976Hz, 29.97Hz and 59.94Hz.
HDMI
 480i
 480p
 576i
 576p
 720p-50Hz, 60Hz
 1080i-50Hz, 60Hz
 1080p-50Hz, 60Hz
 3840 x 2160p– 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
HDMI - UHD
(HOME) > Settings > General settings > Input
source > HDMI(port) >HDMI Ultra HD
This TV can display Ultra HD signals. Some devices –
connected with HDMI – do not recognize a TV with Ultra
HD and might not work correctly or show distorted picture
or sound.
To avoid the malfunctioning of such a device, you can set
the signal quality to a level the device can handle. If the
device is not using Ultra HD signals, you can switch off
Ultra HD for this HDMI connection.
 The setting Optimal* allows maximum up to Ultra HD
(50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2/4:2:0
signals.
 The setting Standard allows maximum up to Ultra HD
(50Hz or 60Hz) YCbCr 4:2:0 signals.
Component, Composite
Composite
 PAL,NTSC,SECAM
Component
 480i
 480p
 576i
 576p
 720p–50Hz, 60Hz
 1080i–50Hz, 60Hz
 1080p –50Hz, 60Hz
Supported Input Resolution – Computer
 640 x 480 – 60Hz
 800 x 600 – 60Hz
 1024 x 768 – 60Hz
 1280 x 800 – 60Hz
 1280 x 960 – 60Hz
 1280 x 1024 – 60Hz
 1366 x 768 – 60Hz
 1440 x 900 – 60Hz
 1920 x 1080 – 60Hz
 3840 x 2160 – 60Hz
Note: For HDMI Input only
Reception
 Aerial input : 75 ohm coaxial (IEC75)
 Tuner bands : Hyperband, S-Channel, UHF, VHF
 DVB : DVB-T2, DVB-C (cable) QAM
 Analogue video playback : SECAM, PAL
 Digital video playback : MPEG2 SD/HD (ISO/IEC
13818-2), MPEG4 SD/HD (ISO/IEC 14496-10), HEVC*
 Digital audio playback (ISO/IEC 13818-3)
 Satellite aerial input : 75 ohm F-type
 Input frequency range : 950 to 2150MHz
 Input level range : 25 to 65 dBm
 DVB-S/S2 QPSK, symbol rate 2 to 45M symbols, SCPC