button with the home icon.
CTN_ALT BOM# Panel Type Setting Set Option Code
55PUS9104/12
TPT550U2-EQLLA3.G SA3C 184
Result:
After accepting the Set Option Code the TV set stores the following items in NVM:
- the TV Set type (Model Number),
- the related option codes, and the default White Point values.
Then the TV set switches to Stand-by to indicate the process is completed.
Note:
Entering a non existing Set Option Code has no effect.
4. Use remote control to switch “ON” the TV set.
5. Use SAM mode to check the Set type (Model number) in NVM and to manually correct if it is wrong.
6. Optionally, check other TV-related items present in NVM and manually adapt them via SAM:
- TV Production code (Serial number on stickers),
- 18 AC of replacement SSB (see bar code sticker on SSB),
- 18 AC of actual Power Supply Unit (see bar code sticker on PSU board),
- 18 AC of actual Display Panel.
Result:
After leaving the SAM mode, the TV set should switch to Standby. The NVM should contain the correct option codes, TV related items and default White
Point values.
To Next Page
Loading...
