To Next PageTo Next Page
Need help?Do you have a question about the Philips 60PFL6008S/12 and is the answer not in the manual?
Details product information, getting started, manuals, FAQs, software and drivers.
Details the various input/output connectors on the TV.
Outlines safety regulations and procedures required during repair.
Highlights critical warnings for service personnel.
Instructions for removing the assembly or panel.
Explains how to use test patterns for diagnosing defects.
Details Service Default Mode (SDM) and Service Alignment Mode (SAM).
Information on creating pre-defined settings and overriding SW protections.
Mode for performing service alignments and accessing option numbers.
Information on activating and using Customer Service Mode for diagnostics.
Diagrams illustrating the start-up process and conditions.
Explanation of error codes and their logging mechanisms.
Methods to clear the error buffer using SAM or other procedures.
Details on error detection mechanisms and logging.
Procedure for interpreting LED blinking codes for fault diagnosis.
Overview of software protections and related fault conditions.
Procedures for upgrading main and standby software versions.
Specifies conditions required for performing electrical adjustments.
Step-by-step procedure for setting correct options and performing alignments.
Details on how to set picture settings and align white point.
Information on changing option settings and codes.
Procedures for resetting the NVM on a repaired SSB.
Information on the power supply unit and its ordering.
Refers to the power architecture diagram for details.
Circuit diagram and PWB layout for the 310431366124 SSB.
Schematic for the power connector on the B01A board.
Circuit diagram for the Fusion supply on the B01B board.
Schematic for the DVBT2 channel decoder on B02C.
Circuit diagram for the DVBS/S2 channel decoder on B02D.
Circuit diagram for the Fusion power supply on B03F.
Circuit diagram for the Fusion supply on B04F.
Details product information, getting started, manuals, FAQs, software and drivers.
Details the various input/output connectors on the TV.
Outlines safety regulations and procedures required during repair.
Highlights critical warnings for service personnel.
Instructions for removing the assembly or panel.
Explains how to use test patterns for diagnosing defects.
Details Service Default Mode (SDM) and Service Alignment Mode (SAM).
Information on creating pre-defined settings and overriding SW protections.
Mode for performing service alignments and accessing option numbers.
Information on activating and using Customer Service Mode for diagnostics.
Diagrams illustrating the start-up process and conditions.
Explanation of error codes and their logging mechanisms.
Methods to clear the error buffer using SAM or other procedures.
Details on error detection mechanisms and logging.
Procedure for interpreting LED blinking codes for fault diagnosis.
Overview of software protections and related fault conditions.
Procedures for upgrading main and standby software versions.
Specifies conditions required for performing electrical adjustments.
Step-by-step procedure for setting correct options and performing alignments.
Details on how to set picture settings and align white point.
Information on changing option settings and codes.
Procedures for resetting the NVM on a repaired SSB.
Information on the power supply unit and its ordering.
Refers to the power architecture diagram for details.
Circuit diagram and PWB layout for the 310431366124 SSB.
Schematic for the power connector on the B01A board.
Circuit diagram for the Fusion supply on the B01B board.
Schematic for the DVBT2 channel decoder on B02C.
Circuit diagram for the DVBS/S2 channel decoder on B02D.
Circuit diagram for the Fusion power supply on B03F.
Circuit diagram for the Fusion supply on B04F.
General| Screen Size | 60 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Type | LED |
| Smart TV | Yes |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Wi-Fi | Yes |
| Ethernet Port | Yes |
| 3D | Yes |
| Ambilight | Yes |
| Refresh Rate | 400 Hz |
| Digital TV Tuner | Yes |
| Audio Output Power | 20 W |
