62 Taking pictures
Take a picture
1.
If the self-timer option is
Off
, and once the
camera was activated, press
m
to take a picture.
2.
The number that appears shows its row. Press:
The number of pictures you can save varies according
to the settings: the higher the resolution, the bigger
the file size. A message will warn you if there isn’t
enough memory left. In this case, you must delete data
before storing a new picture (see “Memory status”
page 44).
When they are saved in the
Picture album
, the pictures
are named "img_0001.jpg", etc., up to 9999. This
does not mean you can take up to 9999 pictures, but
that pictures are numbered up to 9999. Numbering
will then restart from 1 on.
Use the self-timer
1.
Set the self-timer option
On
, then press
m
to
activate it (or press
0
if the option is
Off
).
2.
The countdown starts at 10 seconds (this value
cannot be changed). A sound is played 3 seconds
before the picture is taken, then again when it’s
actually shot.
Press
c
to stop the timer and go back to preview
mode or press
0
to just stop the timer.
3.
Once the picture is shot, follow the instructions
starting at point 2 described in “Take a picture”.
Foto Talk: use the Clip mode
The
Clip
mode allows you to make a clip made of a
picture and a sound.
1.
Select the
Clip
mode, then press
m
to take the
picture.
2.
The
Record sound
window automatically opens:
record the sound or message of your choice
(press
c
to cancel,
,
to stop the recording,
or wait for the maximum recording time of
30 seconds to be reached).
c
To ignore the picture you have just taken
and go back to preview mode.
m
To save it in the
Picture album
.
,
To access the list of available options:
Send
(by MMS, Email or infrared),
Save
it
in the
Picture Album
,
Modify
it, or
Take a
new picture
.
To Next Page
Loading...
