EasyManua.ls Logo

Philips 65BDL3552T - Package Contents; Installation Notes

Philips 65BDL3552T
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65BDL3552T/75BDL3552T/86BDL3552T
4
Before installing the display
This product is packed in a carton, together with the standard accessories.
Any other optional accessories will be packed separately.
Move the display by at least two (2) adults.
After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package Contents
Please verify that you received the following items with your package content:
LCD display
Quick start guide
Remote Control and AAA batteries
Power cable
RS232 cable
RS232 daisy chain cable
IR sensor cable
HDMI cable
DVI cable
Touch USB
Touch Pen
Philips logo plate
Cleaning cloth
USB Cover
* The supplied power cord varies depending on destination.
Quick start guide
Remote Control
and AAA Batteries
LCD Display
FORMAT
SOURCE
INFOLIST
OPTIONSADJUST
VOL
NORMAL
ID
ID SET ENTER
RS232 Daisy
Chain Cable
RS232 Cable
Philips logo
plate
IR Sensor Cable
Power Cord
HDMI Cable DVI Cable Touch pen
Touch USB
Cleaning
cloth
USB Cover
* Items may dier in dierent locations
* Display design and accessories may dier from the images shown.
NOTES:
For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and
complies with the safety regulations of the particular country (Type H05W-F, 2G or 3G, 0.75 or 1 mm
2
should be used).
Keep the packaging materials appropriately after unpacking the product.
1.3. Installation Notes
Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
The product should be installed on a at surface, or the product may tip over. Leave a space between the rear of the product
and the wall for proper ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure
to do so may shorten the life of the internal parts.
Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.

Table of Contents

Related product manuals