Philips 65BDL3552T - Android Settings

65BDL3552T/75BDL3552T/86BDL3552T
37
Language
Select the language used in the OSD menu.
The options are: English/Deutsch/
简体中文
/Français/
Italiano/Español/
Pyccкий
/Polski/Türkçe/
繁體中文
/
日本語
/Português/ /Danish/Swedish/Finnish/Norwegian/
Dutch.
Power Save
Mode 1 [TCP o, WOL on, auto o]
Mode 2 [TCP o, WOL on, auto on/o]
Mode 3 [TCP on, WOL o, auto on/o]
Mode 4 [TCP on, WOL o, no auto on/o]
Power save modes
Mode 1: DC o -> Power o. LED: Red.
Power Save -> Power o, LED: Red
Mode 2: DC o -> Power o, LED: Red.
Power Save -> Power Saving. LED: Orange. Can be woken
up.
Mode 3: DC o -> Back light o, LED: Red
Power Save -> Back light o, LED: Orange. Can be woken
up.
Mode 4: DC o -> Back light o, LED: Red
Power Save -> Will not enter power save mode. show “no
signal” only.
RCU Power
Button O
No Signal Android
Mode 1 DC OFF DC OFF board power
o
Mode
2
DC OFF when signal is back,
system wake up
board power
o
Mode
3
Backlight
OFF
Backlight OFF keep power
on
Mode
4
Backlight
OFF
Backlight ON, show no
signal
keep power
on
Following table is the action for Android board with
dierent power mode.
DC o/on: press power button by RC
Power mode in
OSD
Mode 1/2 Mode 3/4
DC o shutdown 1. The current source APK(such
as MediaPlayer, Broswer or
SmartCMS) will be closed.
2. Android system will go to
the default black launcher.
DC on Boot up 1. Android system reboots
OPS settings
Set the OPS conguration under each power condition.
• {Auto} - After selecting {Card OPS} for video source
input, the OPS will be set to o when the display power
is set to o, or vice versa. If you set to other video source
inputs, the OPS will always be set to on.
• {Always o} - The OPS will always be set to o.
• {Always on} - The OPS will always be set to on.
Advanced option reset
Reset all settings in the Advanced option menu to factory
preset values.
1. Press [SET] or [ ] button to enter the submenu.
2. Press [ ]
or [ ] button to select {Reset} and press the
[SET] button to restore settings to factory preset values.
3. Press the [EXIT] button or select {Cancel} and press the
[SET] button to cancel and then return to the previous
menu.
6.2.6. Android Settings
Please enter the password
CANCEL CLEAR OK
Pincode
Default password is 1234.
For more informations please refer to the instructions of 5.
Setting.