To Next PageTo Next PageWhy Philips UHD TV won't connect to the network?
If your Philips UHD TV cannot connect to the network, verify that your router and/or modem is properly connected. Also, ensure the Ethernet cable connection between the TV and your router or modem is properly secured. Try power cycling the router and/or modem. Finally, check your network settings.
What to do if Philips UHD TV power is on but screen image is off?
If your Philips UHD TV has power but the screen image is off, first check if the connection for your source device is properly secured. Next, check if the correct input is selected by pressing the INPUT button. Also, verify that your HDMI mode for the selected input matches the resolution output of your source device.
What to do if Philips UHD TV has no power?
If your Philips UHD TV has no power, ensure that the AC outlet supplies the proper voltage. You can test the outlet by plugging another electrical appliance into it to confirm it operates normally. If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.
What to do if Philips UHD TV remote buttons are not functional?
General| Screen Size | 65 inches |
|---|---|
| Display Type | LED |
| Refresh Rate | 60 Hz |
| Smart TV | Yes |
| Operating System | Android TV |
| HDR | HDR10, HLG |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Resolution | 4K UHD (3840 x 2160) |
| Chassis | Philips 65PUL7472/F7 |
