To Next PageTo Next Page
Need help?Do you have a question about the Philips LC8.1E LB and is the answer not in the manual?
Details display type, screen size, resolution, contrast, brightness, response time, viewing angle, tuning, color systems, and video playback.
Illustrates side and rear I/O connections, including Aerial, UART, HDMI, SCART, S-Video, and Cinch.
Safety regulations for repairs including isolation transformer use, component replacement, and electrical checks.
Warnings regarding ESD, high voltage, working with powered units, and using non-metallic tools for alignment.
Instructions for removing major internal components like rear cover, speakers, keyboard, and power supply panels.
Explains Service Default Mode (SDM), Alignment Mode (SAM), Customer Service Mode (CSM), and ComPair for diagnostics and calibration.
Details the ComPair tool for diagnostics, software upgrading, and NVM operations, including connection setup.
Explains error codes indicating failures, how to read the error buffer, and lists common error codes and their meanings.
Explains how the blinking LED indicates error codes when the OSD is not functioning properly.
Provides information on upgrading the TV's main software using ComPair.
Offers tips on loading default NVM values, troubleshooting start-up/shut-down issues, and general repair advice.
Depicts the signal flow for video processing from input to output.
Depicts the signal flow for audio processing from input to output.
Specifies electrical conditions and environmental requirements for performing alignments.
Details procedures for aligning tuner settings (AGC) and RGB parameters (White Tone, ADC).
Explains how to set option codes via SAM to configure TV features and hardware.
General
