EasyManua.ls Logo

Philips TPN15.2E LA User Manual

Philips TPN15.2E LA
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Published by CQZ/SC 1548 Quality Printed in the Netherlands Subject to modification EN 3122 785 19972
2015-Nov-27
2015
©
TP Vision Netherlands B.V.
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Colour Television Chassis
TPN15.2E
LA
Contents Page Contents Page
1. Revision List 2
2. Technical Specs, Diversity, and Connections 2
3. Precautions, Notes, and Abbreviation List 5
4. Mechanical Instructions 9
Cable dressing (43" 4900 series) 9
Cable dressing (49" 4900 series) 10
Cable dressing (55" 4900 series) 10
5. Service Modes and Fault Finding 14
6. Alignments 22
7. Circuit Descriptions 24
8. IC Data Sheets 30
9. Block Diagrams
Block diagram 4900 series 35
10. Circuit Diagrams and PWB Layouts Drawing PWB
A 715G6677 PSU
36 40-41
A 715G6973 PSU 42 46-47
B 715G7673 SSB 48 63-64
J 715G7459 IR/LED Panel 65 66
E 715G7088 Keyboard control panel 67 68
11. Styling Sheets
4900 series 43" 69
4900 series 49" 70
4900 series 55" 71
Question and Answer IconNeed help?

Do you have a question about the Philips TPN15.2E LA and is the answer not in the manual?

Philips TPN15.2E LA Specifications

General IconGeneral
BrandPhilips
ModelTPN15.2E LA
CategoryChassis
LanguageEnglish

Summary

Precautions, Notes, and Abbreviation List

Safety Instructions

Essential safety regulations to follow during repair procedures for electrical safety.

Warnings

Critical warnings regarding electrostatic discharge (ESD) and handling high-voltage components.

Service Modes and Fault Finding

Service Default Mode (SDM)

Mode for creating predefined measurement conditions and error identification.

Service Alignment Mode (SAM)

Mode for modifying NVM and performing alignments, including white tone adjustments.

Factory Mode

Mode for extended alignments and changing panel/software settings.

Customer Service Mode (CSM)

Read-only mode for consumers to provide diagnostic information to support centers.

Service Tools

ComPair

A Windows-based tool for diagnostics, repair, and software upgrades via USB.

Fault Finding and Repair Tips

NVM Editor

Direct modification of NVM contents for troubleshooting, with caution advised.

Load Default NVM Values

Uploading default NVM values to restore set functionality after SW changes or corruption.

No Picture Troubleshooting

Troubleshooting steps for no picture issues, including checking display code.

TV Will Not Start-up from Stand-by

Potential causes and solutions for the TV failing to start from stand-by mode.

Alignments

General Alignment Conditions

Specifies environmental and electrical conditions required for performing alignments.

Software Alignments

Steps for performing software alignments like RGB alignment and white tone adjustment in SAM mode.

Display Adjustment

Procedure for adjusting display settings, including color temperature and RGB values.

Option Settings

Explanation of option codes used for microprocessor communication with I2C ICs.

Reset of Repaired SSB

Procedure for resetting NVM on a repaired SSB, including MAC address reload.

Circuit Descriptions

Introduction

Overview of the TPN15.2E LA chassis, its features, and key components.

TPN15.2E LA Architecture Overview

High-level overview of the chassis architecture, referring to block diagrams.

Power Supply

Description of the power architecture, including power supply units and diversity.

DC/DC Converters

Details on the on-board DC/DC converters and their delivered voltages.

Front-End Analogue and DVB-T/C Reception

Description of the front-end components for analog and digital TV reception.

HDMI Input Configuration

Configuration and features of the HDMI input ports.

Video and Audio Processing - NT72666MBG-BA

Detailed features of the NT72666 processor for video and audio handling.

IC Data Sheets

System Power 1 (G5309QN1U)

Block diagram and pin configuration of the G5309QN1U power IC.

System Power 2 (RT8079GQW)

Block diagram and pin configuration of the RT8079GQW power IC.

Tuner/Demodulator (Si2166)

Block diagram and pin configuration for the Si2166 tuner/demodulator IC.

Circuit Diagrams and PWB Layouts

Related product manuals