46 Messages
GPRS settings
This menu allows you to enter or
change the GPRS settings
communicated to you by your operator,
which are:
APN
,
Login
and
Password
. All settings must
be entered as given to you by your operator.
Error messages during connections are mainly due to
incorrect parameters: you should contact your
operator before first use, in order to have the
appropriate GPRS parameters.
GSM settings
This menu allows you to enter or
change the GSM settings
communicated to you by your operator,
which are:
Phone number
,
Auto disconnection
,
Login
and
Password
. Enter them as defined.
Phone Number
: allows you to enter the phone number
provided by your ISP and needed to establish a
connection. Press
+
or
-
to select:
-
ISDN number
to enter an ISDN ISP number,
OR
-
Analogic No.
to enter an analogic number, then
press
,
.
Contact your ISP to know what type of number you
should select.
Auto disconnection
: allows you to select an inactivity
time period after which the phone automatically
disconnects (if a connection was is progress) from the
network. Press
+
or
-
to select a value from 3
to 10min. and press
,
to validate.
The lack of exchanges with the network (connecting,
sending an e-mail, disconnecting) defines the
inactivity time period leading to auto disconnection.
Login
and
Password
were up to you when you
subscribed to your account. Enter them also as
defined.
E-mail server access
The menus described in this section feature settings
needed to connect to the e-mail server of your Internet
Service Provider (ISP) via your mobile phone. Most
parameters are communicated to you by your service
provider and must be entered as given.
1.
Press
,
, select
Messages
>
E-mail
>
E-mail 1
>
Settings
and press
,
.
2.
Select
E-Mail server
and press
,
. The fields to
be completed are the following:
POP3 address
,
SMTP address
,
Login
,
Password
and
E-Mail
address
.
GPRS Settings
GSM Settings
Philips855_GB_MKG_4311 255 58331.book Page 46 Mercredi, 17. décembre 2003 4:32 16
To Next Page
Loading...
