Infrared 63
Send the selected item
As soon as your phone finds another IrDA-compliant
device to communicate with, the sending
automatically takes place. Messages are displayed on
the screen, for you to follow the process.
If the phone finds several IrDA devices, a list is
displayed on the screen, for you to choose from. Press
,
to confirm and to send the selected data.
Sending is cancelled in the following cases:
- the phone cannot find another device and the time
out is reached before any data is sent,
- the infrared link is broken,
- you press the
c
key to cancel the process.
Activate IrDA
To receive data, press
,
and select
Infrared
>
Receive
and press
,
. Your
mobile phone is then ready to receive an
item and waits for the other IrDA device to send it. As
when sending, messages are displayed on the screen
and allow you to follow up the process.
Receiving is cancelled in the following cases:
- the phone isn’t contacted by another device and the
time out is reached before data is received,
- the infrared link is broken,
- the size of the file sent is too large for your phone to
manage it,
- you press the
c
key to cancel the process.
Save the data received
Several options are available when receiving data from
another IrDA device:
Press
c
Cancels the process: if you confirm your choice by
pressing
,
, the phone goes back to idle and the
data you have received isn’t saved.
Names
Phonebook
>
View names list
(or press
-
when in idle mode).
Events
Games & Appli
>
Organiser
>
Events
Receive data
Infrared
Philips855_GB_MKG_4311 255 58331.book Page 63 Mercredi, 17. décembre 2003 4:32 16
To Next Page
Loading...
