Philips Electronics
- 64 -
6.2 Taking Care of PhotoFrame™
1) Do not drop
PhotoFrame™ is a complicated electronic device and cannot withstand shock from
being dropped.
2) Do not expose to moisture
PhotoFrame™ is neither moisture proof nor moisture resistant. Exposing it to moisture
or liquid of any kind will very likely damage your PhotoFrame™.
3) Do not hit or scratch
The LCD panel of PhotoFrame™ is made of glass and is therefore sensitive to abnormal
force and sharp edges.
4) Screen cleaning
Use only a dry soft cloth to clean your screen.
5) Battery charging
For first time use, fully charge your PhotoFrame™ (Battery LED will be off when battery
is fully charged). This process may take up to 3 hours or more. PhotoFrame™ starts
fully recharging its internal battery only when the battery level is below certain value.
This is designed to extend your PhotoFrame™ battery life by reducing unnecessary
battery charging.
6) Keep the stand clear from cables
Make sure the stand of your PhotoFrame™ is clear from cables as cables could pull the
stand out of PhotoFrame™ to the floor.
7) Temperature and humidity limitations
Operating temperature: 0° ~ 45° (Celsius) / 32° ~ 113° (Fahrenheit)
Humidity: 20% ~ 80%
To Next Page
Loading...
