Philips AC0820 - Replacing the filter; Understanding the healthy air protect lock

11EN
English
5 Replacing the filter
Understanding the healthy air protect lock
This appliance is equipped with the healthy air protect lock to make sure that
the NanoProtect lter is in optimal condition when the appliance is operating�
When the lter is almost expired, the lter replacement alert ( ) lights up
red, which indicates that it needs to be replaced� If you do not replace the
lter in time, the lter replacement alert ( ) will ash� The appliance will stop
operating and get locked�
Replacing the lter
Note:
• The lter is not washable or reusable�
• Always turn o the air purier and unplug from the electrical outlet before
replacing the lter�
CLOSEOPEN
CLOSEOPEN
1 2 3 4 5
1 Rotate the base anti-clockwise to remove it from the appliance�
2 Pull the lter out from the appliance� Discard the used lter�
3 Remove all packaging materials of the new lter�
4 Put the lter into the appliance�
5 Reattach the base and rotate it clockwise to fasten the base�
6 Put the plug of the air purier in the power socket�
7 Press the power button to switch on the appliance�
8 Press and hold for 3 seconds to reset the lter lifetime counter�
9 Wash your hands thoroughly after replacing the lter�